ST-LINK & ST-LINK/V2

STMICROELECTRONICS – ST-LINK  & ST-LINK/V2 – DEBUGGER/PROGRAMMER, ICD, FOR STM8 and STM32


The ST-LINK/V2 in-circuit debugger and programmer for the STM8 and STM32  microcontroller families features a single wire interface module (SWIM) and a JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

  • 5 V power  from USB connector, USB 2.0 full speed compatible interface
  • SWIM specific features:

– 1.65 V to 5.5 V application voltage supported on SWIM interface

– SWIM low-speed and high-speed modes supported
– SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
– SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
– SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
  • JTAG/serial wire debugging (SWD) specific features:
– 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
– JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
– JTAG supported
– SWD and serial wire viewer (SWV) communication supported

http://www.st.com/internet/evalboard/product/251168.jsp

Farnell Order Code: 1892523

The ST-LINK (V1) features: 
  • USB 2.0 full speed interface compatible
  • SWIM specific features:
    • 1.65 V to 5.5 V application voltage supported on SWIM interface
    • SWIM low speed and high speed modes supported
    • SWIM programming speed rates of 9.7 Kbytes/s in low speed, 12.8 Kbytes/s in high speed
    • SWIM cable for connection to an application with an ERNI standard connector vertical (ref: 284697 or 214017) or horizontal (ref: 214012)
    • SWIM cable for connection to an application with pin headers or 2.54 mm pitch connector
  • JTAG/SWD specific features:
    • 3 V to 3.6 V application voltage supported on JTAG/SWD interface and 5 V tolerant inputs
    • JTAG/SWD cable provided for connection to a standard JTAG 20-pin pitch 2.54 mm connector

http://www.st.com/internet/evalboard/product/219866.jsp

Leave a Reply