FPGA

Lattice Semiconductor Image SensorExtender Board Kit

Lattice Semiconductor launches the new Image SensorExtender Card (SEC) Set

With this design, Lattice makes a big leap in the Image Processing Industry:  it allows to extend the path between the Image Sensor and the Image Signal Processor via some SerDes/LVDS protocol over Twisted Pair CAT5e/6 Cable .

The distance is presented as up to 8 meters for 720p60 or 1080p30 resolution.

 

Some links:

SensorExtender: www.latticesemi.com/sensorextender

Quick Start PDF: QS018 MachXO2 SensorExtender Card Set QuickStart Guide

The RD1148 Sensor Extender PDF

IGLOO FPGAs by Actel/Microsemi

The ultra-low power IGLOO family of flash FPGAs is designed to be used in battery-powered portable devices.

The power consumption is @5 µW and the voltage from 1.2V to 1.5V.

Actel IGLOO Flash*Freeze

Actel IGLOO Flash*Freeze

Flash*Freeze Mode is the technology used in IGLOO devices that enables easy entry and exit from ultra-low power mode (2 µW) while retaining SRAM and register data.

Low-power applications that require 32-bit processing can use the ARM® Cortex™-M1 processor without license fee or royalties in M1 IGLOO devices.

The IGLOO family includes:

Lattice starts shipping ECP4 FPGAs First Samples

LatticeECP4 Block Diagram

LatticeECP4 Block Diagram

Lattice has begun shipping the highest density member of the next generation LatticeECP4 FPGA family to select customers.

This new family offers the richest portfolio of low cost, low power mid-range devices under 200K LUTs, with high performance innovations such as 6G SERDES in low cost packages, powerful DSP blocks and built-in hard IP-based communication blocks.

The highest density device in the family, the LatticeECP4-190, features 183K LUTs, 480 double data rate DSP multipliers (18×18), 5.8 Mbits of memory and twelve 6 Gbps SERDES channels, making it ideally suited for a broad range of cost- and power-sensitive wireless, wireline, video and computing applications.

 

LatticeECP4 Family:

http://www.latticesemi.com/products/fpga/ecp4/index.cfm

LatticeECP4 Samples:

http://www.latticesemi.com/corporate/newscenter/newsletters/newsjune2012/ecp4samples.cfm

LatticeECP4 Overview Video:

http://www.latticesemi.com/products/fpga/ecp4/overviewvideo.cfm

LatticeECP4 Datasheet:

http://www.latticesemi.com/dynamic/view_document.cfm?document_id=43587

RSS EETimes Semiconductor News
  • We Need to Talk About Buttons September 29, 2020
    Why is it that buttons always seem to be placed someplace other than where they'd be most useful The post We Need to Talk About Buttons appeared first on EETimes.
  • Capture-the-Flag Competitions Need to Include Hardware September 29, 2020
    Hackers are increasingly probing hardware for security vulnerabilities. The industry needs to develop expertise to counteract those attacks. The post Capture-the-Flag Competitions Need to Include Hardware appeared first on EETimes.
  • US Reportedly Restricts Exports to SMIC September 28, 2020
    The U.S. is reported to have restricted exports to SMIC, citing the possibility the technology could support China's military. The post US Reportedly Restricts Exports to SMIC appeared first on EETimes.